Hi guys, I've just changed my filter and now my car wont start, I'm thinking its probaby got air trapped somewher in there, and the filter line are not getting any fuel to them, tdci 1.6 sport please help as I'm so desperate to be on the road. Ford Model: Focus 1.6 TDCi Ghia & 2.0 Ecoblue estate Ford Year: 2019 UK/Ireland Location: Other/NonUK an oil and filter change has fixed it, which is fantastic.
Hi guys, As in the title, I have a 2010 1.6 TDCI Focus Zetec. I am aware of the turbo failure issues on TDCI engines (not 100% sure if the issue is present in the ‘facelift’ MK 2.5 model - conflicting information online) and I’ve read that regular oil changes can help.
Ford Fusion Club ; Fusion 1.4 TDCI oil Fusion 1.4 TDCI oil Focus Ford Year: 2009 UK/Ireland Location: Greater Manchester Oil filter too obviously.
Hi all just to let you know had a new ford fuel filter fitted when mechanic changed them over the non genuine filter seal was a bad fit very loose worse than the ford one! and seal was under the filter instead of on top to make a good seal, cars run great now no problems over a week now and 800 miles.Will fit a genuine every time now.
I'm going to be installing an oil temperature sensor on my 1.6 tdci and I'm wondering if anyone has either A, done it before, B has an idea where is best to put it. Due to the filter used I cant use a sandwich plate unless anyone knows how to convert it to a cartridge filter and I don't want to place anything in line with the turbo
Hi I bought a 1.5dci ztech ford focus eastate 14 plate and the temp gauge hardly moves had the thermostat and temp sensor. Replaced still the same any ideas cheers John Hi John, you'd be better off starting your own thread for this.
Ford Model: Fusion. Ford Year: 2007. UK/Ireland Location: Shropshire. Posted March 20. Have just come in to ownership of this Fusion, and the first thing I want to do is to change the oil and filter. Having located the filter (with difficulty), it is obvious the large concertina hose on the intake to the air filter has to come off to gain access.

Oil change on a 2012 Ford Mondeo 2.0 TDCIA few little tips to get the job done easily.I use Morris Oil and this is the F913D oil designed for Ford Duratorq e

Posted January 14, 2019. I was looking to purchase a 2012 focus 1.6 diesel with 25k miles on the clock. On examining the engine bay, I noticed some oil around the concertina intake between the air filter and the turbo. On removing the intake pipe, there was about 15ml of oil in the pipe. I assume that the oil came from the rocker cover breather. Posted September 28, 2012. Well, if there is a leak it could be anywhere but one common failure point is on the steel pipe that runs from the turbo outlet pipe, across the front and then down to the intercooler inlet. This pipe has been know to develop a crack near where the mounting bracket is welded on that attaches the pipe onto the engine Ford Model: Fiesta 1.6 TDCI. Ford Year: 2010. UK/Ireland Location: Worcestershire. Posted April 16, 2015. I have a Fiesta 1.6 TDCI reg in 2010. I know where the oil filter is. BUT having removed the engine top cover and the air filter housing I am confronted with 2 radiator hoses. Both block access to the filter cap - the lower one in
This article discusses in detail the engine oil used in Ford Focus cars: 1st generation (mk1): 1998, 1999 DuraTorq-TDCi: 3.8 / filter: 0.4: 4 / 0.42: 5W-30: 1.6
Posted March 21, 2013. Hi People, Ford focus 1.8 TDCI 02 plate, changed the oil and filter after a head rebuild, started the car up and programmed the injectors, i noticed that the top end was starting to knock a bit, completed a compression test on all cylinders and this was fine, good compression across all four, completed an oil pressure I0G9VA.
  • bxu033mutp.pages.dev/363
  • bxu033mutp.pages.dev/437
  • bxu033mutp.pages.dev/443
  • bxu033mutp.pages.dev/367
  • bxu033mutp.pages.dev/433
  • bxu033mutp.pages.dev/463
  • bxu033mutp.pages.dev/402
  • bxu033mutp.pages.dev/324

    • ford focus 1.6 tdci oil filter location